Non-Contact AC Voltage Detector 12-300V Voltage Breakpoint Finder Continuity Live Wire Tester Electrical Pen with Flashlight

Non-Contact AC Voltage Detector 12-300V Voltage Breakpoint Finder Continuity Live Wire Tester Electrical Pen with Flashlight

Descriptions:

— INDUCTIVE MODE MEASUREMENT: Automatically differentiate between neutral/live wires, or locate breakpoints
— AC VOLTAGE MEASUREMENT: Measure the level of AC voltage and differentiate between neutral and live wires based on the voltage level.
— WIRE CONTINUITY DETECTION: If the wire is connected properly, a “-C” symbol will be displayed, and the buzzer will sound. If the wire is open or disconnected, the measuring pen will not show any response.
— LED ILLUMINATION LIGHT: Providing light in dark environments
— SOUND AND LIGHT DUAL INDICATIONS: When measuring voltage, the display screen and buzzer provide dual indications
— DATA HOLD: Locking data during the measurement process allows for convenient viewingand recording of the measured values.
— BATTERY POSITIVE ELECTRODEDETECTION: With the right hand, press and hold the CONNECT button on the tester pen, then with the left hand, make contact with one end of the battery, and finally, use the tester pen probe to touch the other end of the battery. Correct: The screen displays ‘–P’ and the buzzer sounds. Reverse: No response.”
— AUTOMATIC SHUTDOWN: The measuring pen will automatically shut down after approximately 5 minutes of inactivity.
— PORTABLE PEN CLIP: Designed with a portable pen clip for easy carrying

Features:

— Zero fire line identification
— Battery positive electrode detection
— Line breakpoint detection
— Sound and light alarm
— Pen holder design
— Flashlight lighting
— Data retention
— Automatic shutdown

Specification:

Display: LCD display
Range of Voltage Detection: AC12-300V,50/60HZ
Connect Detection: Yes
Battery Positive Detection: Yes
NCV: Yes
Alarm Mode: Sound and light alarm
Probe Shape: Oblate shape
Backlight: Red and green double color backlight
Live And Neutral: According to LCD’s display
Signal Intensity Display: LCD display
Signal Intensity Indication Method: sound from slow to fast; backlight from green to red; LCD data from small to big
Flashlight: Yes
Auto Power Off: No operation, no sensing signal will shut down automatically in about 5 minutes
Data Hold: Yes
Low-Battery Indication: Yes
Power Supply: 1×1.5V AAA batteries (The battery is not included in the product)
Product weight: Approx.38g
Product size: 147×26.5×26.5mm
Safety rating: EN61010-1-2-030, EN61326-1, CAT II 300V

Packing List:

1* Voltage Tester
1* User Manual