MESTEK Socket Tester Detector wiring Electroscope Electric Plug Color Screen RCD Safety test Electric Tester Home Socket Tester

SOCKET TESTER

·The polarity detection of the three-hole power socket wiring
·The protection function detection of the leakage switch
·It can quickly and accurately detect the wiring

Widely used

-fire protection
-laboratory
-factory
-family

Voltage measurement

1. The normal voltage range of zero fire line is plus or minus 10% of the local standard voltage. If it is too high or too low, it may be because the circuit load is too high or the power supply is too low/ too high.
2. The normal voltage of zero-earth wire is less than 2V, if too high maybe it is because there is current leakage, or the three phase-sequence is out of balance or there is signal interference in the circuit.

RCD TEST

Please turn off all electrical appliances before using this function,and do so with permission to ensure that the power outage will not cause any harm.

VA color display screen

The high-definition display can see the screen value clearly in the dark environment

Panel Introduction

1.Low battery indication
2.socket pin indication
3.Zero-live voltage test Value display
4.Power on/off
5.RCD leakage current Test button
6.warning symbol
7.Zero-earth voltage test value display
8.Socket wiring status display area

Test status analysis

Operation Introduction

1.Before using. please open the battery cover ,Install two AAA batteries. (shown as right)
2.Long press the power button for 2 seconds, then it is power on.(shown as right)
3.Plug the product into the socket to be tested to test the current socket line status and voltage.

Technical Parameters

Show details

Product accessories

-Socket tester
-Packing box
-User manual